To activate the PoP Timer, firmly press the green Start button until you hear a distinct, loud beep. Next, maintain pressure on the Reset button until you hear two quieter beeps. All PoP timers have been tested, but if not used recently and the buttons are slightly stiff, press the green Start again until you get a beep and then hold Reset to stop. You may need to do the same with the Reset if you don't get two clear beeps.

To initiate the timer, press the Start button. You'll hear a distinct beep indicating the timer has begun. After one minute, another clear beep will sound. Two clear beeps will follow at the two-minute mark. At three minutes, you'll hear three clear beeps, followed by continuous beeping marking the end of the 3-minute rule.

Hold down the Reset button until you hear two softer beeps. This action will transition the PoP Timer into standby mode, ready for your next use whenever you choose to start again.

The battery is estimated to last for approximately 350 searches.

Any faulty PoP Timers should be returned within 30 days for replacement, free of charge.

To replace the PopTimer battery, you'll need a CR1632 3V lithium coin battery. These are available to purchase on Amazon.‍